Welcome to the Atari Eiffel v3 Order Form
Here you'll find details on what to order for your Eiffel3 setup. There's also additional details on Didier's original site on which this board is based.
Please read the disclaimer below. Ensure you understand the implications of plugging the device into your system.
Warranty Disclaimer
THESE PRODUCTS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THESE PRODUCTS OR THE USE OR OTHER
DEALINGS IN THESE PRODUCTS.
Configuration
Selecting the Eiffel3 consists mainly of four basic parts.
- Select the board itself
- Select your PIC for either Atari or Coldfire operation (or both if you want switchability)
- Select a cable, either serial for coldfire, or the internal or the external cable for Atari systems. Note: I've just found out that the RJ11 to RJ11 external cables need to have pin 2 & 3 crossed in the cable due to a design glitch.
- Select a shipping charge (UK or Worldwide)
That's pretty much it. There's additional options though.
- Joystick Cable. This is a male DB9 shell to the 5+5 header cable on the Eiffel board. Remember there are two joystick ports on the Eiffel3 board, so you need two cables if you want both.
- Temperature sensor. This is a thermistor attached to the end of 2 way header cable.
- LCD interface. This includes the attachment cable and the logic chip needed to drive the LCD.
NOTE1: For Coldfire systems you may need to provide power on pin 9 of the DB9 port as some Coldfire systems don't by default.
NOTE2: If you are ordering multiple quantities please contact me for a shipping quote.
NOTE3: Please feel free not to order cables if you feel you can get them cheaper or build them cheaper yourselves. The same goes for the PICs, if you have a programmer, then feel free to acquire and program your own devices. Thanks.
Ordering is now open, please allow 3 weeks for delivery.
If there are any questions about what to order, feel free to contact me.
|
| Item |
Description |
Price |
Buy |
Eiffel v3 board |
Eiffel v3 board with no PIC.
You'll need a PIC - either the 16F876 or 18F258 below |
£24.00 |
|
PIC16F876 |
PIC16F876 for Atari systems
You'll want to select an internal or external cable unless you are making your own. |
£7.00 |
|
PIC18F258 & PCA82C251 CAN |
PIC18F258 for Coldfire systems, includes the PCA82C251 CAN chip.
You'll want to select a serial cable unless you are making your own |
£11.00 |
|
LCD, 74LS174N & LCD Cable |
LCD, LCD cable and 74LS174N chip |
£13.00 |
|
Internal Keyboard Cable |
Internal Keyboard Cable to Eiffel board (30cm) |
£4.00 |
|
External Keyboard Cable |
External Keyboard Cable to Eiffel board (pins 2 & 3 are crossed with this cable - not a standard RJ11 to RJ11 cable)
(30cm) |
£3.00 |
|
|
Thermistor Cable
(temperature sensor - 50cm) |
£3.00 |
|
Joystick Cable |
Joystick Cable
(DB9 Male to Eiffel3 board - 50cm) |
£4.00 |
|
|
Coldfire Cable
(DB9 Female to Eiffel3 board - for use with CAN port - 50cm) |
£4.00 |
|
|
Shipping charge - UK only(single quantity - please email for multiple shipping quote) |
£5.00 |
|
|
Shipping charge - Worldwide (single quantity - please email for multiple shipping quote) |
£11.00 |
|